- 제품소개
-
오늘보다 더 나은 내일, 풍요로운 미래를 위해 땀 흘려온
현대하이켐이 행복한 미래를 만들어 갑니다.
Heat Molding Epoxy binder
HD BINDER DSW
It is water dispersion epoxy resin advantageous in environmental and working aspects as the organic solvent is not used. It displays the excellent mechanical properties after hardening in high temperature (200-210℃). In addition, its inflammability is excellent owing to the inflammable additive.
| Stability | HD BINDER DSW is environment friendly epoxy resin which does not contain the organic solvent. It is high temperature heat setting type epoxy resin and excellent in saving stability. |
|---|---|
| Composition | Bisphenol A epoxy compound |
| Revelation | Appearance : Milky white dispersion liquid Solid content : 35 ± 1 % Viscosity(25℃) : Less than 500cps pH : 5.0 ± 1.0 |
| Expiry date | 3 months after manufacturing date |
| Immunity notice | The above reports are the results from our laboratory and it does not guarantee the working at actual site certainly. |
| Manufacturer |  |
Example of padding process application
| Application fabric | Polyester non-woven |
|---|---|
| Polyester non-woven | Padding method (1Dip1Nip) |
| Coating amount(Wet pick-up) | 70 – 80 % |
| Drying condition | 130℃ * 5min |
| Forming condition | 200-210℃ * 2min |
Perform souring firstly on the fabric to be used.
Agitate sufficiently for more than 10 minutes in low speed before using.
Decide to use after performing appropriate pre-test because the use amount is differed depending on the fabric type and required physical properties.
Set the time for the processing, drying and forming of this chemical within 1 month.
Perform the post processing (Drying and forming and etc.) of this chemical certainly after verification.
Decide the forming temperature and forming time after performing appropriate pre-tests because the forming processing conditions are differed depending on fabric type.
Check the compatibility and stability fully in case of mixed using with other chemicals.
Keep certainly under the room temperature of 5-35℃ because it can be frozen in case of keeping under -4℃.
Seal with the cap certainly during or after use.